8" x 8" Fire-Rated Insulated Access Door with Flange for Drywall - Acudor

8" x 8" Fire Rated Insulated Access Door with Flange for Drywall

The FW-5050-DW drywall, insulated fire rated access door is an enhanced FW-5050 that includes a galvanized steel drywall taping bead flange to facilitate installation in drywall. The Acudor FW-5050 is an insulated, fire rated access door approved for use in walls and ceilings. For walls, this door has an Underwriters Laboratories (UL and ULC), 1-1/2 hour "B" label, with a maximum temperature rise of 250 degrees after 30 minutes. This door should be used in walls when temperature rise or heat transmission is a factor. For fire rated ceilings, this door has been approved by Warnock Hersey International for 3 hours (max. size to 24" x 36") In-Stock and Ready to Ship !

Product Spec Sheet:
Door Size:	8" wide x 8" high
Rough Opening Size:	8" wide x 8" high
Material:	Steel
Lock/Latch:	Universal self-latching bolt, operated by either a knurled knob or flush key. When master keying is required, doors can be prepared for rim or mortise cylinder locks
Flange:	1" flange
Hinge:	Concealed pin hinge
Finish:	5 stage iron phosphate preparation with prime coat of White alkyd baked-on enamel
Cross Reference:	Comparison Tool