48" x 48" Galvanized Roof Hatch W/ Safety Rail - JL Industries

48" x 48" Galvanized Roof Hatch W/ Safety Rail - JL Industries

The 48" x 48" RHG-STH is the best roof hatch recommended for installation in commercial establishments. Suppose the commercial building requires a durable roof hatch that provides smooth and safe access into the commercial building. In that case, the RHGS-TH Galvanized Roof Hatch with Safety Rail is the best choice!

Why install the RHG-STH?  

Certified: A safe and usable product with certifications under OSHA CFR 29-1910.28 when ordered with a self-closing rigid gate feature.

Durability and Aesthetics: The RHG-STH is a very durable yet attractive roof hatch that your commercial building needs. With a durable 14 gauge galvanized steel 12" high curb and 3-5/8" wide flange for securing the roof deck with a gray textured powder coat finish representing toughness, this galvanized steel roof hatch proves to be the best out there.

Safety: Built with a durable safety railing made of 1.66" O.D. galvannealed steel tubing with a safety yellow powder coat paint, the RHG-STH is one of the safest roofs hatched out there. You'll have no problem installing it, as the counterflashing has welded corner brackets. 

Variety: If you are looking for variety in a product, you can choose from RHGD's various options on its features that will surely fit your commercial building

Specifications:

Roof Hatch  

• Material: 14 gauge galvannealed steel.
• Finish: Gray textured powder coat paint.
• Curb: 12" single wall curb with 3-5/8" wide flange with holes for securing to roof deck.
• Cover: 14 gauge galvannealed steel, with 22 gauge galvanized steel liner. EPDM gasket seal.
• Insulation: 1" Fiberboard insulation in the curb and 1" mineral wool in the cover.
• Hardware: Heavy-duty hinge, pin, and fastening hardware are zinc-plated steel. Heavy gauge, automatic hold-open arm with red vinyl grip for opening and closing.
• Spring: Counterbalanced spring(s) in cylinders for a lift assist.
• Latch: Zinc-coated exterior and interior handle with interior and exterior padlock hasp.
• Load/Deflection: Tested and approved roof hatch to support a minimum live load of 40 lbs/ft² with a maximum deflection of 1/150th of the span, maximum negative load of 50 lbs/ft² wind uplift, and 110 mph wind load when covered. 

Railing  

• Certifications: When ordered with an optional rigid gate, the railing meets OSHA 1910.29 requirement for safe egress and ingress through rooftop hatch openings.
• Material: 1.66" O.D. galvannealed steel tubing.
• Finish: Safety yellow powder coat paint.
• Hardware: Zinc-plated steel nuts, bolts, and washers and 3/16" ASTM-proof coil chain with hoops for securing

Call Us Today!

Why Choose Access Doors and Panels? Because we are your reliable source of practical and handy access panels for your walls, ceilings, floors, and even your roofing system. We understand your access and security needs, so you can always talk to our expert product specialists and apply for credit! Call us at (800)-609-2917 and experience our excellent products and services! 

Product Spec Sheet:
Door Size:	48" x 48"
Material:	Galvanized Steel